http://dx.doi.org/10.1590/S1516-14392011005000103 Effect of the low temperature annealing on primary and secondary structures and magnetic properties of Fe-3% Si
Cesar, Maria das Graças M. M.; Paolinelli, Sebastião da Costa; Alcântara, F. L.; Cota, André Barros MORE

http://dx.doi.org/10.1590/S1516-14392012005000001 Analysis of surface hardness of artificially aged resin composites
Tornavoi, Denise Cremonezzi; Satoa, Sandra; Silva, Leandro Jardel; Agnelli, José Augusto M.; Reis, Andréa Cândido dos MORE

http://dx.doi.org/10.1590/S1516-14392011005000098 Conversion of sandy tailing from banded iron formation exploitation into glass-ceramic materials
Melo, Valéria Alves R. de; Lameiras, Fernando Soares; Tolentino, Evandro MORE

http://dx.doi.org/10.1590/S1516-14392011005000097 Rheological studies of aqueous stabilised nano-zirconia particle suspensions
Khan, Asad Ullah; Haq, Anwar Ul; Mahmood, Nasir; Ali, Zulfiqar MORE

http://dx.doi.org/10.1590/S1516-14392011005000102 The effects of severe plastic deformation on some properties relevant to Ti implants
Mendes Filho, Anibal Andrade; Sordi, Vitor Luiz; Ferrante, Maurizio MORE

http://dx.doi.org/10.1590/S1516-14392012005000003 Phase transformations in an AISI 410S stainless steel observed in directional and laser-induced cooling regimes.
Lima, Milton Sergio F. de; Santo, Ana Maria do E. MORE

http://dx.doi.org/10.1590/S1516-14392011005000093. Experimental investigations on mode II fracture of concrete with crushed granite stone fine aggregate replacing sand
Rao, Kanchi Balaji; Desai, Vijaya Bhaskar; Mohan, D. Jagan MORE

http://dx.doi.org/10.1590/S1516-14392012005000004 Fabrication and corrosion resistance of Mg-Zn-Y-based nano-quasicrystals alloys
Wang, Zhifeng; Zhao, Weimin; Qin, Chuling; Cui, Yan MORE

http://dx.doi.org/10.1590/S1516-14392011005000096 Corrosion of reinforcing bars embedded in alkali-activated slag concrete subjected to chloride attack
Chaparro, Willian Aperador; Ruiz, Jorge Hernando B.; Gómez, Robinson de Jesús T. MORE

http://dx.doi.org/10.1590/S1516-14392011005000095 Microstructure and transformation characteristics of a TiAlNb alloy with Cr and Mo addition
Nansaarng, Santirat; Srichandr, Panya MORE

http://dx.doi.org/10.1590/S1516-14392011005000092 Theoretical models to predict the mechanical behavior of thick composite tubes
Tita, Volnei; Caliri Junior, Mauricio Francisco; Massaroppi Junior, Ernesto MORE

http://dx.doi.org/10.1590/S1516-14392011005000091 Nanoparticle assisted coagulation of aqueous alumina suspensions
Çetinel, Abdullah Fatih; Simon, Reinhard Anton MORE

http://dx.doi.org/10.1590/S1516-14392011005000090 Ca2Ge7O16 nanowires grown from CaO and GeO2
Pei, Li-Zhai; Pei, Yin-Qiang; Yang, Yong; Zhang, Qian-Feng MORE

http://dx.doi.org/10.1590/S1516-14392011005000101 Texture analysis of cold rolled and annealed aluminum alloy produced by twin-roll casting
Martins, Juliana de Paula; Carvalho, André Luis M. de; Padilha, Angelo Fernando MORE

http://dx.doi.org/10.1590/S1516-14392011005000100 Determination of rheological properties of fresh concrete and similar materials in a vibration rheometer
Juradin, Sandra MORE

http://dx.doi.org/10.1590/S1516-14392011005000089 Cu(II) adsorption on modified bentonitic clays: different isotherm behaviors in static and dynamic systems
Almeida Neto, Ambrósio Florêncio de; Vieira, Melissa Gurgel A.; Silva, Meuris Gurgel Carlos da MORE

http://dx.doi.org/10.1590/S1516-14392011005000094 Surface integrity analysis when milling ultrafine-grained steels
Rodrigues, Alessandro Roger; Balancin, Oscar; Gallego, Juno; Assis, Cleiton Lazaro F. de; Matsumoto, Hidekasu; Oliveira, Fernando Brandão de; Moreira, Suzana Regina da; Silva Neto, Otavio Villar MORE

http://dx.doi.org/10.1590/S1516-14392012005000007 Spray Forming of al Alloys: Experiment and Theory
Antipas, Georgios S. E. MORE

http://dx.doi.org/10.1590/S1516-14392012005000006 Effect of Chemically Treated Leather Shaving Addition on Characteristics and Microstructure of OPC Mortars
Ribeiro, Daniel Veras; Yuan, Shi Yung; Morelli, Marcio R. MORE

http://dx.doi.org/10.1590/S1516-14392012005000005 Analysis of semi-solid processing for metal matrix composite synthesis using factorial design
Ranieri, Kratus; Kiyan, Carlos; Costa, Antonio Fernando B.; Simões, Alexandre Zirpoli MORE

http://dx.doi.org/10.1590/S1516-14392011005000099 In Vitro Biological Evaluation of 3-D Hydroxyapatite/Collagen (50/50 wt. (%)) Scaffolds
Campos, Doris Moura; Anselme, Karine; Soares, G. D. A. MORE

http://dx.doi.org/10.1590/S1516-14392012005000002 Modification of the titanium oxide morphology and composition by a combined chemical-electrochemical treatment on cp Ti
Peláez-Abellán, Ernesto; Duarte, Lais Tereza; Biaggio, Sonia Regina; Rocha-Filho, Romeu Cardozo; Bocchi, Nerilso MORE