http://dx.doi.org/10.1590/S1516-14392012005000180 The influence of the industrial processing on the degradation of poly(hidroxybutyrate) - PHB
Pachekoski, Wagner Mauricio; Dalmolin, Carla; Agnelli, José Augusto M. MORE

http://dx.doi.org/10.1590/S1516-14392012005000177 Investigations on cementitious composites based on rubber particle waste additions
Nacif, Glaucio Laun; Panzera, Tulio Hallak; Strecker, Kurt; Christoforo, Andre Luis; Paine, Kevin MORE

http://dx.doi.org/10.1590/S1516-14392013005000021 Synthesis and characterization of CeO2 nanocrystals by solvothermal route
Kumar, E.; Selvarajan, P.; Muthuraj, D. MORE

http://dx.doi.org/10.1590/S1516-14392013005000012 Rutting prediction of asphalt mixtures modified by polypropylene fibers via repeated creep testing by utilising genetic programming
Tapkin, Serkan; Çevik, Abdulkadir; Gülşan, Eren MORE

http://dx.doi.org/10.1590/S1516-14392013005000003 Accelerated artificial aging of particleboards from residues of CCB treated Pinus sp. and castor oil resin
Bertolini, Marília da Silva; Lahr, Francisco Antonio R.; Nascimento, Maria Fátima do; Agnelli, José Augusto M. MORE

http://dx.doi.org/10.1590/S1516-14392012005000182 Preparation and characterization of stainless steel 316L/HA biocomposite
Silva, Gilbert; Baldissera, Márcia Regina; Trichês, Eliandra de Sousa; Cardoso, Katia Regina MORE

http://dx.doi.org/10.1590/S1516-14392013005000005 Matrix consolidation mechanism in 1D-Ti/SiC/C composites produced by continuous binder-powder coating
Ferreira, Ricardo Artur S.; Yadava, Yogendra Prasad; Quenisset, Jean Michel; Arvieu, Corinne MORE

http://dx.doi.org/10.1590/S1516-14392012005000184 Analysis of effective thermal conductivity for mineral cast material structures with varying epoxy content using TPS method
Selvakumar, A.; Mohanram, P. V. MORE

http://dx.doi.org/10.1590/S1516-14392013005000001 Development of methodology for measurements of residual stresses in welded joint based on displacement of points in a coordinated table
Siqueira Filho, Aníbal Veras; Rolim, Tiago Leite; Yadava, Yogendra Prasad; Cardoso, Francisco Ilo B.; Guimarães, Pablo Batista; Maciel, Theophilo Moura; Ferreira, Ricardo Artur S. MORE

http://dx.doi.org/10.1590/S1516-14392012005000183 Wear mechanisms of dental composite restorative materials by two different in-vitro methods
Souza, Juliana Antonio de; Dolavale, Liliane Canuto; Camargo, Sergio Alvaro de S. MORE

http://dx.doi.org/10.1590/S1516-14392013005000017 Waste polyethylene terephthalate as an aggregate in concrete
Saikia, Nabajyoti; Brito, Jorge MORE

http://dx.doi.org/10.1590/S1516-14392013005000015 Experimental analysis and theoretical predictions of the limit strains of a hot-dip galvanized interstitial-free steel sheet
Freitas, Maria Carolina dos S.; Moreira, Luciano Pessanha; Velloso, Renata Garcez MORE

http://dx.doi.org/10.1590/S1516-14392012005000175 Nanocomposite of photocurable epoxy-acrylate resin and carbon nanotubes: dynamic-mechanical, thermal and tribological properties
Santos, Marcos Nunes dos; Opelt, Carlos Vinicius; Pezzin, Sergio Henrique; Amico, Sandro Campos; Costa, César Edil da; Milan, Julio Cesar; Lafratta, Fernando Humel; Coelho, Luiz Antonio F. MORE

http://dx.doi.org/10.1590/S1516-14392013005000002 Aqueous dispersion of red clay-based ceramic powder with the addition of starch
Umaran, Maria Victoria A.; Menchavez, Ruben Labandera MORE

http://dx.doi.org/10.1590/S1516-14392013005000008 Influence of neutral and charged species on the plasma degradation of the stearic acid
Bernardelli, Euclides Alexandre; Mafra, Marcio; Maliska, Ana Maria; Belmonte, Thierry; Klein, Aloisio Nelmo MORE

http://dx.doi.org/10.1590/S1516-14392012005000181 Statistic evaluation of cysteine and allyl alcohol as additives for Cu-Zn coatings from citrate baths
Garcia, Julyana Ribeiro; Lago, Dalva Cristina B. do; Silva, Fernando Lucas G.; D'Elia, Eliane; Luna, Aderval Severino; Senna, Lilian Ferreira de MORE

http://dx.doi.org/10.1590/S1516-14392013005000014 Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization
Kontoleontos, Foteini; Tsakiridis, Petros; Marinos, Apostolos; Katsiotis, Nikolaos MORE

http://dx.doi.org/10.1590/S1516-14392013005000019 Synthesis and characterization of Ni-Mo filler brazing alloy for Mo-W joining for microwave tube technology
Sene, Frank Ferrer; Motta, Claudio Costa MORE

http://dx.doi.org/10.1590/S1516-14392013005000010 Nucleation and growth process of sodalite and cancrinite from kaolinite-rich clay under low-temperature hydrothermal conditions
Reyes, Carlos Alberto R.; Williams, Craig; Alarcón, Oscar Mauricio C. MORE

http://dx.doi.org/10.1590/S1516-14392013005000004 Sugarcane bagasse and castor oil polyurethane adhesive-based particulate composite
Fiorelli, Juliano; Sartori, Diogo de Lucca; Cravo, Julio Cesar M.; Savastano Junior, Holmer; Rossignolo, João Adriano; Nascimento, Maria Fátima do; Lahr, Francisco Antonio R. MORE

http://dx.doi.org/10.1590/S1516-14392012005000179 Evaluation of erosion-corrosion resistance in Fe-Mn-Al austenitic steels
Aperador, William Arnulfo; Ruiz, Jorge Hernando B.; Betancurt, Juan D. MORE

http://dx.doi.org/10.1590/S1516-14392012005000178 Evaluation of properties and FEM Model of the Friction welded mild Steel-Al6061-Alumina
Seli, Hazman; Awang, Mokhtar; Ismail, Ahmad Izani Md.; Rachman, Endri; Ahmad, Zainal Arifin MORE

http://dx.doi.org/10.1590/S1516-14392012005000176 Synthesis of TiO2 by the pechini method and photocatalytic degradation of methyl red
Ribeiro, Pollyana Caetano; Costa, Ana Cristina F. de M. da; Kiminami, Ruth Herta G. A.; Sasaki, José Marcos; Lira, Hélio Lucena MORE

http://dx.doi.org/10.1590/S1516-14392012005000185 Finite element reduction strategy for composite sandwich plates with viscoelastic layers
Diacenco, Adriana Amaro; Lima, Antonio Marcos G.; Correa, Edmilson Otoni MORE

http://dx.doi.org/10.1590/S1516-14392013005000013 Extraction of alginate biopolymer present in marine alga sargassum filipendula and bioadsorption of metallic ions
Kleinubing, Sirlei Jaiana; Gai, Frederico; Bertagnolli, Caroline; Silva, Meuris Gurgel Carlos da MORE

http://dx.doi.org/10.1590/S1516-14392013005000024 Study of phase transformations In API 5L X80 Steel in order to increase its fracture toughness
Pedrosa, Igor Rafael V.; Castro, Renato Soares de; Yadava, Yogendra Prasad; Ferreira, Ricardo Artur S. MORE

http://dx.doi.org/10.1590/S1516-14392013005000011 Crystallization of II-VI semiconductor compounds forming long microcrystalline linear assemblies
Becerril, Marcelino; Portillo-Moreno, Oscar; Lozada-Moráles, Rosendo; Ramire-Bon, Rafael; Ochoa-Landín, Ramón; Sánchez-Sinencio, Feliciano; Santoyo-Salazar, Jaime; Zelaya-Angel, Orlando MORE

http://dx.doi.org/10.1590/S1516-14392013005000020 Photoluminescence properties of thermally stable highly crystalline CdS nanoparticles
Dhage, Sanjay R.; Colorado, Henry A.; Hahn, Hong Thomas MORE

http://dx.doi.org/10.1590/S1516-14392013005000018. Comparison between Neutron Diffraction measurements and numerical simulation of residual stresses of a Wire-Drawing process
Souza, Tomaz Fantin de; Soares, Carla Adriana T.; Zottis, Juliana; Nunes, Rafael Menezes; Rocha, Alexandre da Silva; Hirsch, Thomas MORE

http://dx.doi.org/10.1590/S1516-14392013005000007 Removal of Cadmium(II) and Lead(II) ions from aqueous phase on sodic bentonite
Galindo, Luz Stella G.; Almeida Neto, Ambrósio Florêncio de; Silva, Meuris Gurgel Carlos da; Vieira, Melissa Gurgel A. MORE

http://dx.doi.org/10.1590/S1516-14392013005000006 Platinum uptake from chloride solutions using biosorbents
Morcali, Mehmet Hakan; Zeytuncu, Bihter; Yucel, Onuralp MORE

http://dx.doi.org/10.1590/S1516-14392013005000009 Implication of low temperature and sonication on electrocrystallization mechanism of Cu thin films: a kinetics and structural correlation
Mallik, Archana; Ray, Bankim Chandra MORE

http://dx.doi.org/10.1590/S1516-14392013005000016 Rutting analysis of 100 mm diameter polypropylene modified asphalt specimens using gyratory and Marshall compactors
Tapkin, Serkan; Keskin, Mustafa MORE